Instruction to Authors

 SSPS International Journal for Business Management & Research  

Instructions to authors

High profiled experts in their respective field of research are invited for advisory editorial members / referees / reviewers. They can send their bio-data with their field of interest to the following email editor@sspsindia.in or fill the AUTHORIZATION FORM and send to our office. 

The Advisory editorial members / referees / reviewers are honorary position where their contributions to the journal would be acknowledged in each issue.

If you are interested for FACULTY/RESEARCH SCHOLAR MEMBERSHIP, fill MEMBERSHIP FORM and send to us.

All manuscripts are subjected to RAPID peer review process and those of high quality (which are not previously published and are not under consideration for publication by another journal) would be published without any delay in subsequent issue. Submit manuscript through our emailid manuscript@sspsindia.in. A manuscript number will be mailed to the corresponding author within 48 Hours or Early.

MANUSCRIPT PROCESSING STEP
Step 01:
Required manuscript in Soft (MS-Word) only .
Step 02:
Level – ONE: Acceptance will be provided by the Publisher’s after confirmation by Editorial Board.
Step 03:
Processing Fees have to deposit by Author.
Step 04:
Level – TWO: Quality Process will be start & Quality Report send to Author after Processing
(If required).
Step 05: Level – THREE: Quality Process will be start & Quality Report send to Author after Processing
(If required).
Step 06: Level – FOUR: Quality Process will be start & Quality Report send to Author after Processing
(If required).
Step 07: After Complete Processing Gallery Proof will be forward to Author by Quality Department
for Finalizing.
Step 08: Manuscript will be forwarded to Software Technical Department for E-Coding.
Step 09: Finalize manuscript will be E-Published.
Step 10: E-Certificate will be issued separately to each Author(s).

COVER LETTER

During submission of the article, a cover letter should be included having :
(1) Authors full address and telephone/fax number. 
(2) The type of article (Research or Review) along with the title and the type of branch under which the article to be published should be mentioned.
(3) The corresponding author should mention the undertaking that if any animal studies carried was in accordance with their country or institutional ethical committee and also state that the manuscript has not been published elsewhere (except in the form of an abstract or as part of a published lecture or academic thesis).

Research Article 
These articles should clearly describe new and carefully confirmed results and experimental procedure which should be given in required details for others to verify the work. The article can be up to 8 A4 Pages including references and abstract. For proper referring and fast publication all manuscript should be grammatically correct. Additional fee may be charged by the editor for correction if the manuscript has extensive grammatical mistakes which would be intimated to the corresponding
author before final acceptance.

The manuscript should be prepared in English using “MS Word” with 1 inches margin on all sides (Top, Bottom, Left and Right side) of the page. “Times New Roman” font should be used. The font size should be of 10pt but main subheadings may be of 10pt. All plant and microorganism’s scientific names should be written in italic. All research article should be typed single spaced and should have the following sections: Title page, Abstract, Key words, Introduction, Materials and methods, Results, Discussion, Conclusion, Acknowledgement (if any) and References.

Title Page 
The title should appear on a top of the page which should then followed by the author name and the institution name and address by indicating suitable superscripts.
Title page should contain title of the paper in bold face, title case (font size 24), names of the authors in normal face, upper case (font size 11) followed by the address(es) in normal face lower case (font size 10). An asterisk (*) must be placed after the corresponding authors name as superscript whose email id, fax, telephone number can be given at the bottom left corner of the title. Corresponding author has the responsibility to ensure that all co authors are aware and approve the contents of the submitted manuscript.

Abstract 
This section come after Title Page should contains detail the problems, experimental approach, major findings and conclusion in one paragraph and should appear on the continuously page. Avoid abbreviation, diagram and references in the abstract. It should be single – spaced and should not exceed 150 words for full papers.

Keywords
Author(s) must give about 4-6 key words which can identify the most important subjects covered by the paper. They must be placed at the end of the abstract.

Introduction 
The manuscript should include a brief introduction stating the purpose of the investigation and relating the manuscript to similar previous research. Only information essential to the arguments should be presented.

Materials and Methods 
This section must contain specific details about the materials studied, instruments used, specialized chemicals source and related experimental details which allows other research worker to reproduce the results. Obtain permission for all fully borrowed, adapted, and modified tables and provide a credit line in the footnote.

Results  and Discussions 
The results should be concisely presented. Results and discussion may be separate or combined based on the authors requirement. Tables and figures should be designed to maximize the comprehension of the experimental data. The interpreted results should be explained clearly in discussions and should relate them to the existing knowledge in the field as clearly as possible. Tables, Graphs and figures (Illustrations) should be inserted in to the main text at respective place they should appear when published and should have appropriate numbers and titles with an explanatory heading. The table, graph and figures heading may have smaller font titles but should not be less than 10 pt in size. Labels of the table, graph and figures MUST be in the text form and should not form part of the image. Colour photographs and illustrations (line drawings, halftones, photos, photomicrographs etc) must be clean originals or digital files would be charged that may be intimated along with the acceptance letter. Those photographs must be clear and sharp. Digital files are recommended for highest quality reproduction and should follow the following guidelines :
(1) 300dpi or higher sized to fit journal page
(2) JPEG, GIF, TIFF and PDF formats are preferred)
(3) Acknowledgement (if any)

This section can be kept at the end of the manuscript before reference section and should not be more than 50 words. This section can be used to acknowledge the help of those who do not qualify for authorship or to acknowledge funding, donated resources or significant contribution to the research.

References 
References to the literature cited for the manuscript should be numbered in order of appearance in the manuscript and cited in the text with superscript numbers. The reference number should follow the following format.

For Journal Reference 
N.G. Hingorani and L. Gyugyi, Understanding FACTS, concepts and technology of Flexible AC Transmission systems, piscatway, NJ: IEEE press, 2000.

For Book Reference 
S. A. Edwards. The Nanotech Pioneers, Wiley-VCH Verlag, Weinheim, 2006, pp. 1-14.

For Chapters in Book Reference 
P. S. Meltzer, A. Kallioniemi, and J. M. Trent. Chromosome alterations in human solid tumors. In: B. Vogelstein, and K. W. Kinzler (eds.), The Genetic Basis of Human Cancer, McGraw-Hill, New York, 2002, pp. 93-113.

For Patent Reference 
H. Aviv, D. Friedman, A. Bar-Ilan and M. Vered. Submicron emulsions as ocular drug delivery vehicles, U.S. Patent US 5496811, 1996.

Review Article 
Organisation of the review article is at the author’s discretion and must be at a length of 8 A4 Pages including references and abstract. Abstract and key words are required. Tables, figures, illustrations and references are to be arranged according to research papers.

Copyright 
Submission of the manuscript represent that the manuscript has not been published previously and is not considered for publication elsewhere. Authors would be required to sign a CTA form (Copy Right Transfer Agreement) once the manuscript is accepted which would be sent to the corresponding author’s email. The corresponding author can download the form and after getting authors and co-authors signature it can be send as an attachment file after scanning to the journal or by post/courier along with the publication charges.

Manuscript Charges 
Article Processing Charge will be Rs. 3100/- (w.e.f. 1st June, 2014) for Single Indian Author and $100 for Foreign Authors. For NEXT SECOND, THIRD, FOURTH & FIFTH AUTHOR the Processing Charge will be additional. There is NO fee for PUBLICATION process.

Paper  Format 
After acceptance, all manuscript must be submitted in prescribed format mentioned in our website. We don’t publish until we receive the manuscript in word document formatted as instructed in our website.

Gallery Proofs
Galley proofs would be sent unless indicated otherwise to the corresponding author. It is the responsibility of the corresponding author to ensure that the galley proof are to be returned without delay with correction if (any). The authors are responsible for the contents appeared in their published manuscripts.

 “All Rights Reserve to SSPS-IJBMR”

ISSN:2350-0956